BNDML - 9201, METHYLCYCLOHEXANE
- MSDS: BNDML
- Manufacturer: J T BAKER INC
- Product Name: 9201, METHYLCYCLOHEXANE
- National Stock Number: 6810-00N029731
Product Identification
Product ID:9201, METHYLCYCLOHEXANE
MSDS Date:09/03/1986
FSC:6810
NIIN:00N029731
MSDS Number: BNDML
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
CYCLOHEXANE, METHYL-; (METHYLCYCLOHEXANE)
CAS: 108-87-2
RTECS: GV6125000
Fraction By Weight: 90-100%
OSHA PEL 500 PPM
ACGIH TLV: 400 PPM; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO EFFECTS OF OVEREXPOSURE WERE
DOCUMENTED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:CALL MD. INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
EYES:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS.
SKIN:FLUSH W/W ATER. INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:CC
Flash Point:25.0F,-3.9C
Lower Limits:1.2%
Upper Limits:6.7%
Extinguishing Media:USE ALCOHOL FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
(WATER MAY BE INEFFECTIVE).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. MOVE EXPOSED CONTR FROM FIRE AREA IF IT CAN BE DONE W/OUT RISK.
USE H2O TO KEEP FIRE EXPOSED CONTR COOL.
Unusual Fire/Explosion Hazard:VAPORS MAY FLOW ALONG SURFACES TO DISTANT
IGNIT SOURCES & FLASH BACK. CLOSED CONTRS EXPOSED TO HEAT MAY
EXPLODE. CONTACT W/STRONG OXIDIZERS MAY CAUSE FIRE.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROT CLTHG. SHUT OFF IGNIT
SOURCES; NO FLARES/SMKNG/FLAMES IN AREA. STOP LEAK IF YOU CAN DO SO
W/OUT RISK. USE H2O SPRAY TO REDUCE VAPS. TAKE UP W/SAND/OTHER
NON-COMBUST ABSORB MATL & PL ACE INTO CONTR FOR LATER DISP. FLUSH
AREA W/H2O.
Neutralizing Agent:J. T. BAKER SOLUSORB SOLVENT ABSORBENT IS
RECOMMENDED FOR SPILLS OF THIS PROD.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL-VENTILATED,
FLAMM LIQUID STOR AREA. KEEP CONTAINER TIGHTLY CLOSED. KEEP AWAY
FROM HEAT, SPARKS & FLAME. USE W/ADEQ VENT.
Other Precautions:WARNING! FLAMMABLE! BOND & GROUND CONTAINERS WHEN
TRANSFERRING LIQUID. AVOID BREATHING VAPOR.
Exposure Controls
Respiratory Protection:RESPIRATORY PROTECTION REQD IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS UP TO 1000 PPM, A
NIOSH/MSHA APPRVD CHEM CARTRIDGE RESPIRATOR W/ORGANIC VAPOR
CARTRIDGE IS RECOM. ABOVE THIS LEVEL, A NIOSH/MSHA APPROVED SCBA
IS RECOM.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT & VENT HOOD.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:214F,101C
Melt/Freeze Pt:M.P/F.P Text:-197F,-127C
Vapor Pres:37
Vapor Density:3.4
Spec Gravity:0.77 (H2O=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:COLORLESS LIQUID W/FAINT BENZENE-LIKE ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, FLAME & SOURCES OF IGNITION.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ALL APPLICABLE FEDERAL,
STATE & LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.